INK1003 LED Digital Strip;30leds/m;5m/reel;DC12V input;with 30pcs 5050 RGB Chip;30pixels/m;waterproof IP67;Black PCB
Parameter Voltage: DC12V IC type: INK1003
IC quantity: 30pcs/meter LED type: SMD5050 RGB LED quantity: 30pcs/meter Pixel: 30pcs/meter Max power: 9W/meter Grey scale: 256 Size: 5000x12x3mm
IP Grade:waterproof silicon tube IP67
Advantage High brightness SMD5050 LED Cuttable every LED+IC along the mark Each LED individually controlled Can show customized effects Support online control No ultraviolet and infrared radiation Energy saving Low heat-release Long lifetime for 50,000hrs CE and RoHS approved
Items for different waterproof
IP20: Non waterproof, 3M backside IP65: Glue drop on the front side, 3M tape backside IP67: Silicone tube protection IP68: PVC tube+glue
1. Please use DC12V only; 2. There are direction arrows on the PCB, arrow direction for connecting next reel strip; 3. GND not only for power wire, also as signal wire, need connect to both power and controller; 4. The Max distance between strips is 5m-10m, need use amplifier when more than 10m; 5. Every 5m strip need re-connect to power supplier, avoiding voltage drop; 6. Keep the surface of installation place clear and smooth, avoiding the strip fall off. DO NOT press the LED; 7. DO NOT attempt to make sharp bend with the strip; 8. DO NOT install where water or high humidity may be present without further protection; 9. Away from strong acid or strong alkali.